Mini Tree Reaper Brush Cutter - Mini Skid Steer - by CID

CID Mini Tree Reaper Brush Cutter

The CID Mini Tree Reaper is a hydraulic brush cutter attachment for mini skid steers and compact utility loaders. It runs off your machine's auxiliary hydraulics to clear brush and saplings up to 4″ in diameter, so landscapers, property owners and rental fleets can clear overgrown lots, fence lines and trails with a small machine. It's offered in 40″ and 48″ cutting widths for machines flowing 10–15 GPM, with Dingo, Bobcat MT50, RC30 and Universal Skid Steer mounts.

Which Mini Tree Reaper Do I Need?

• 40″ (TRD-40 / TRMT-40): your mini loader flows 10–15 GPM and uses a Dingo or Bobcat MT50 attachment plate. 551–558 lbs.
• 48″ (TRD-48 / TRMT-48 / TRRC-48 / TRUNI-48): your machine flows 10–15 GPM and you want a wider cutting path. Available with Dingo, Bobcat MT50, RC30 or Universal Skid Steer mounts. 634–663 lbs.

Not sure what your machine flows? Check your operator's manual, or call us with your make and model before you order.

CID Mini Tree Reaper Specs

Mount Options

Choose the mount that matches your machine's attachment plate:

• Dingo Mount (TRD-40, TRD-48)
• Bobcat MT50 Mount (TRMT-40, TRMT-48)
• RC30 Mount (TRRC-48, 48″ only)
• Universal Skid Steer Mount (TRUNI-48, 48″ only)

What It's Used For

Clearing brush, saplings and overgrowth on residential lots, fence lines, trails, ditches and tight areas where a full-size skid steer won't fit.

Frequently Asked Questions

What hydraulic flow does the CID Mini Tree Reaper need?

The models on this listing run on 10–15 GPM auxiliary flow, and no case drain is required. CID also lists 14–20 and 16–26 GPM versions; call us if your machine flows more.

How thick a tree can the Mini Tree Reaper cut?

CID rates the Mini Tree Reaper for brush and saplings up to 4″ in diameter, using two 5/8″ AR400 steel blades.

How much does the Mini Tree Reaper weigh?

The 40″ models weigh 551–558 lbs. and the 48″ models weigh 634–663 lbs., depending on the mount.

Which mount do I need?

Match the mount to your machine: Dingo mount, Bobcat MT50 mount, RC30 mount (48″ only), or Universal Skid Steer mount (48″ only).

What's the difference between the 40″ and 48″ models?

The 48″ cuts a wider path and weighs about 75–110 lbs. more. The 40″ comes in Dingo and Bobcat MT50 mounts; the 48″ adds RC30 and Universal Skid Steer mounts.

Does it need a case drain?

No. CID's high-torque motor on the Mini Tree Reaper does not require a case drain line.

Shop all skid steer brush cutters. CID attachments carry a manufacturer warranty; see the CID Warranty Information Page for details.