Mini Auger Drive - Mini Skid Steer - by CID

CID Mini Skid Steer Auger Drive

The CID Mini Skid Steer Auger Drive is a hydraulic auger drive for mini skid steers and mini track loaders that runs off your machine's auxiliary hydraulics to dig post holes and planting holes without hand tools. It's built for landscapers, fence installers and contractors who need to drill in tight spaces. A direct-drive planetary gearbox delivers 3,020 ft-lbs of torque at 3,500 PSI on 5–13 GPM of flow, with no chains to break or come loose. It ships complete with the mounting plate, hoses and couplers, and you can add a matching 4″–36″ CID bit in the Bit option to get the drive and bit in one order.

Which CID Mini Auger Drive Do I Need?

• Hex Shaft (MINIADH): you run bits with a 2″ hex collar. 287 lbs. shipping weight.
• Round Shaft (MINIADR): you run bits with a 2-9/16″ round collar. 280 lbs. shipping weight.

Both drives need 5–13 GPM of auxiliary flow and use the standard mini skid steer quick attach. CID lists its mini skid steer attachments for Toro Dingo, Boxer, Ramrod, Ditch Witch, Thomas, and Bobcat MT50, MT52, MT55 and 463. Not sure what your machine has? Check your operator's manual, or call us with your make and model before you order.

Add a Matching Auger Bit

Pick a size in the Bit option and we'll ship the matching CID bit with your drive. All bits are 42″ tall, and the collar matches the shaft you choose (2″ hex or 2-9/16″ round). Choose No Bit if you already have one.

• 9″–12″: fence and deck posts.
• 18″–24″: trees and shrubs.
• 30″–36″: footings.

Need a second bit? Call us.

CID Mini Auger Drive Specs

What It's Used For

Fence and deck post holes, tree and shrub planting, sign and mailbox posts, and landscaping and light construction work where a full-size skid steer won't fit.

Frequently Asked Questions

What hydraulic flow does the CID mini auger drive need?

CID rates the mini auger drive for 5–13 GPM of auxiliary flow. It produces 3,020 ft-lbs of torque at 3,500 PSI and is rated for 3,000 PSI continuous and 4,000 PSI intermittent pressure.

What machines does it fit?

It uses the standard mini skid steer quick attach. CID lists its mini skid steer attachments for Toro Dingo, Boxer, Ramrod, Ditch Witch, Thomas, and Bobcat MT50, MT52, MT55 and 463. Confirm your machine's mount and auxiliary flow before ordering.

Should I get the hex or round shaft?

Match the shaft to your bits: MINIADH has a 2″ hex output shaft and MINIADR has a 2-9/16″ round output shaft. Both have the same 3,020 ft-lb torque rating.

What comes with it?

The drive comes complete with the mounting plate, hoses and couplers. Pick a size in the Bit option to add a matching 4″–36″ CID bit in the same order, or choose No Bit if you already have one.

What size auger bits can I get with it?

Choose a 4″, 6″, 9″, 12″, 15″, 18″, 20″, 24″, 30″ or 36″ CID bit in the Bit option. All bits are 42″ tall and the collar matches the shaft you pick. Use 9″–12″ for fence and deck posts, 18″–24″ for trees and shrubs, and 30″–36″ for footings.

How much does the mini auger drive weigh?

The hex-shaft drive ships at 287 lbs. and the round-shaft drive at 280 lbs. A bit adds 42–261 lbs. depending on size.

Shop all auger drives. CID attachments carry a manufacturer warranty; see the CID Warranty Information Page for details.