4-in-1 Bucket - Mini Skid Steer - by CID

CID Mini Skid Steer 4-in-1 Bucket

The CID Mini Skid Steer 4-in-1 Bucket is a hydraulic clamshell bucket for mini skid steers that works as a bucket, dozer blade, grapple and grading tool in one attachment. Dual 2″ × 6″ cylinders run off the machine's auxiliary hydraulics to open and close the clamshell. It's built for landscapers, contractors and property owners who want to dig, load, backfill, grade and grab brush or debris without swapping attachments. It comes in seven widths from 36″ to 72″, each available smooth or with weld-on teeth.

Which CID Mini 4-in-1 Bucket Do I Need?

• 36″ (MINI4N1-36 / -36T): the narrowest and lightest at 301 lbs., for gates, backyards and tight access.
• 44″ and 48″ (MINI4N1-44 / -48): 368 and 380 lbs., common widths for Dingo-style and Bobcat MT mini skid steers.
• 54″ and 60″ (MINI4N1-54 / -60): 445 and 511 lbs., more width per pass for grading and cleanup.
• 66″ and 72″ (MINI4N1-66 / -72): 565 and 610 lbs., the widest options. CID also sells 54″–72″ as its compact tractor 4-in-1 bucket.
• Teeth: add weld-on teeth (“T” SKUs) for digging in hard or compacted ground.

Not sure which width or mount fits your machine? Check your operator's manual for its rated operating capacity, or call us with your make and model before you order.

CID Mini 4-in-1 Bucket Specs

All widths: dual 2″ × 6″ cylinders, 1/2″ × 4″ cutting edge, 1/4″ bottom wrap, 10-gauge back wrap, grease fittings at every pivot point. Weights shown are CID's published weights without teeth.

Mount Options

CID builds the mini 4-in-1 bucket for Dingo, Bobcat MT and RC30 mounts, with alternate mounts available. Tell us your machine make and model when you order so we can confirm the right mount.

What It's Used For

Digging and loading dirt, gravel and mulch; dozing and back-dragging for fine grading; backfilling trenches and foundations; and grabbing brush, logs, rocks and demolition debris for site cleanup, especially in yards and tight spaces where a full-size skid steer won't fit.

Frequently Asked Questions

What machines does the CID mini 4-in-1 bucket fit?

CID builds it for Dingo, Bobcat MT and RC30 mounts, with alternate mounts available. CID also sells the 54″–72″ widths as its compact tractor 4-in-1 bucket, so call us with your machine make and model before you order.

How much does the CID mini 4-in-1 bucket weigh?

CID lists 301 lbs. for the 36″ up to 610 lbs. for the 72″ (smooth edge).

What hydraulics does it need?

The clamshell is opened and closed by dual 2″ × 6″ hydraulic cylinders that run off your machine's auxiliary hydraulics.

Should I get it with or without teeth?

Choose weld-on teeth (the “T” SKUs) for digging in hard or compacted ground. Go smooth if you mostly grade, doze, back-drag and load loose material.

What cutting edge does it have?

Every width has a 1/2″ × 4″ cutting edge, a 1/4″ bottom wrap and a 10-gauge back wrap. CID lists a bolt-on edge as optional; ask us if you want one.

Which width should I choose?

Pick a width that covers your machine's track or tire width, and keep the bucket weight plus your load within your machine's rated operating capacity.

Shop all 4-in-1 buckets. CID attachments carry a manufacturer warranty; see the CID Warranty Information Page for details.